On the evolution of two-dimensional patterns in an inviscid liquid sheet

We perform an analysis of the pattern formation for a moving sheet of inviscid fluid. The sheet, which is assumed to have an infinite horizontal extent, moves at some prescribed velocity into a passive surrounding gas. The sheet’s thickness is assumed much smaller than the horizontal scale of the fluid motion. By considering a system that is symmetric with respect to the horizontal planes, long scale asymptotics are used to reduce the full governing equations in three dimensions to a set of three coupled nonlinear partial differential equations for the horizontal components of the velocity field and the height of the interface profile. The interfacial conditions consisting of the kinematic and normal stress balance are incorporated into these evolution equations. Investigations are carried out as function of the sole dimensionless parameter, namely the Weber number. A small amplitude stability analysis around the planar gas–liquid interface reveals that wave patterns in the form of traveling plane waves occur subcritically, and are therefore unstable. The reduced evolution equations are solved numerically for fixed values of the Weber number. Since the reduced system of equations is homogeneous, the wave motion is generated by initial conditions. Five initial conditions have been imposed: one-dimensional rolls, two-dimensional squares, two-dimensional hexagons, two-dimensional ridges, and smooth peaks. The ensuing evolution of the liquid sheet’s shape and corresponding flow fields are described by illustrations of the changes in the sheet’s morphology with time.     

Modification of a three-way catalyst washcoat by aging: A study along the longitudinal axis

This work reports the research carried out by studying aliquots extracted at different axial coordinates from Three Way Catalyst (TWC) monoliths aged under real traffic conditions. Our study focused on the catalytic properties and on several chemical and physical effects caused in the Front and Rear monolith washcoat surfaces by vehicle aging after 60,000 km. Regarding the catalytic properties, all the used aliquots showed poorer activity than their corresponding fresh counterparts. The strongest deactivation was detected for NO and hydrocarbon conversion. CO conversion was less affected and the Rear monolith was as deactivated as the Front one. The characterisation techniques (TXRF, N₂ adsorption-desorption isotherms, XRD and H₂-TPR) detected - (i) the deposition of P, Zn and Pb; (ii) the formation of CePO₄ on account of the Ce from the washcoat; (iii) thermal sintering; (iv) inhibition of the reducibility of Ce oxides - as the main effects brought about by vehicle aging conditions. The deactivation observed at the beginning of the Front monolith was the result of a combination of the former effects. When moving downstream to higher axial coordinates, Pb accumulation and the loss of specific area appeared to be the only probable sources of deactivation.     

Polyethylene compounds with antimicrobial surface properties

The present study aims at antimicrobial polyethylene surfaces. To achieve this, LLDPE was compounded with the polymeric biocide poly(2-tert-butylaminoethyl) methacrylate TBAM (bulk modification with 1.5-5.0 wt.% of TBAM). Surfaces of these polymer compounds were then subjected to microbial assays. Using standard methods the colony forming units (CFU) for Escherichia coli and Staphylococcus aureus were determined on these surfaces. In all cases, polyethylene surfaces with highly antimicrobial properties were achieved. An average reduction of 10⁴ CFU ml⁻¹ compared to neat LLDPE was achieved. The surfaces of these LLDPE/TBAM compounds were assessed by electrokinetic (zeta potential) measurements. The results indicate a relation between the antimicrobial activity and the zeta-potential of the polymer compounds. Moreover, the antimicrobial compounds were investigated towards biofilm formation. Compared to pristine LLDPE, the surfaces of the polymer compounds showed less adhering biofilm after a testing period of 16 weeks.     

La（NCS）3.4.5H2O和B15C5在乙醇中的相平衡及热化学研究

采用半微量相平衡方法测定了三元体系Ｌａ（ＮＣＳ）３．４．５Ｈ２Ｏ－Ｂ１５Ｃ５－Ｃ２Ｈ５ＯＨ在２９８．１５Ｋ的溶解度，测定了各饱和溶液的折光率。     

Carbon deposition on a Ni/α-Al2O3 catalyst

The kinetics of carbon deposition over a Ni/α-Al₂O₃ commercial catalyst, has been studied using CH₄−H₂ gas mixtures in the range of 748–873 K. A Hougen-Watson type model gives good agreement with the experimental rates.     

杂氮硅三环成环反应的研究

本文报导了与硅原子直接相连的有机基团(R)对杂氮硅三环成环速率的影响。利用气相色谱检测成环反应的产物之一——乙醇的生成速率和数量,并同与硅相连的R基团对成环反应速率的影响作比较。实验结果表明五种杂氮硅三环成环速度顺序为Cl_2CH—>ClCH_2—>ClCH_2CH_2CH_2—>CH_2=CH—>CH_3—,这与理论推断相符。     

Clathrate formation in water-cyclic ether systems at high pressures

Experimental data on the investigation of the water-trimethyleneoxide system,P, t, x phase diagram (up to 6 kbar) are presented. The results are compared with those on water systems with ethyleneoxide, 1,3- and 1,4-dioxane, 1,3-dioxolane and tetrahydrofuran, on the basis of which a summarizedP, t, x diagram is plotted for water-cyclic ether systems. It is shown that in all the systems in which a cubic structure II hydrate forms at 1 bar, it eventually turns to cubic structure I under pressure. The nature of high pressure hydrates is discussed.Dedicated to the memory of D. W. Davidson.     

Cyanex 923-H2SO4体系萃取第3相的形成和应用

三相体系;Cyanex 923-H2SO4体系萃取第3相的形成和应用